ER-D-12 Digital Output Type Dual - Axis Inclinometer - Vertical Mounting

Main Features:
•Two axis inclination Measurement(vertical mounting);
•Range±1~±90° for optional;
•Accuracy: refer to performance table;
•DC9~36V Wide voltage input input;
•Wide working temperature-40~+85℃;
•Resolution 0.01 °
•IP67 protection grade;
•High vibration resistance >2000g;
•Direct lead interface;
•Size 90 x 40x 26mm (customizable);
•Output mode RS232, RS485, TTL, CAN 2.0b is optional;

Product Details


Product Description

ER-D-12 is a biaxial tilt sensor (vertical installation) with serial port output type for industrial field control. Ordinary horizontal sensor can only be measured by peers when it is installed horizontally. However, the vertical installation cannot be measured normally. The output interface RS485/RS232RS422/TTL is optional. Due to the inbuilt ADI's high-precision digital sensor, the temperature drift of the sensor can be corrected according to the change of the inbuilt temperature sensor to guarantee the high repeatability of the product in low temperature and high temperature environment. The output response frequency standard can reach 18Hz. If higher response frequency is needed, our company can customize it according to users. The product is a real industrial grade product with reliable and stable performance and good expansibility. Suitable for all kinds of harsh industrial control environment.

 1111

Main Features

• Dual axis inclination Measurement(vertical mounting)                            

• Range±1~±90° for optional

• Accuracy: refer to performance table                                                      

• DC936V Wide voltage input input

• Wide working temperature-40+85℃                                                   

• Resolution 0.01 °  

• IP67 protection grade                                                                             

• High vibration resistance >2000g                        

• Direct lead interface                                                                                

• Size 90 x 40x 26mm (customizable)

• Output mode RS232, RS485, TTL, CAN 2.0b is optional

 

Product application

• Satellite dishes search the stars

• Railway locomotive monitoring

• All kinds of engineering machinery dip measurement

• Petroleum drilling equipment

• Radar vehicle platform detection

• Attitude navigation of underground drill

• Measurement of initial firing Angle of gun barrel

• Directional measurement based on dip Angle

• Satellite communication vehicle attitude detection

• Measurement of navigation posture of ships

• Shield pipe jacking application

• Slope monitoring of geological equipment

 

Product performance index

Parameter

Condition

ER-D-12-10

ER-D-12-30

ER-D-12-60

ER-D-12-90

Unit

Measurement Range


±10

±30

±60

±90

°

Measurement Axis


X Y

X Y

X Y

X Y


Resolution Ratio


0.01

0.01

0.01

0.01

°

Absolute Accuracy

@25℃

0.02

0.05

0.08

0.1

°

Long-term Stability


0.05

0.05

0.05

0.05


Zero Temperature Coefficient

-40~85°

±0.006

±0.006

±0.006

±0.006

°/℃

Sensitivity Temperature Coefficient

-40~85°

≤100

≤100

≤100

≤100

Ppm/℃

Power on start time


0.5

0.5

0.5

0.5

S

Response Time


0.02

0.02

0.02

0.02

s

Output Rate

5Hz, 15Hz, 35Hz,50Hz and 100Hz can be set

Output Signal

RS232/RS485/RS422/TTL/PWM/CAN/MODBUS

Electromagnetic Compatibility

According To EN61000 And GBT17626

 

 MTBF

≥50000hours/time

Insulation Resistance

≥100Ω

Impact Resistant

100g@11msTriaxial harmony (half normal)

Resistance To Vibration

10grms10~1000HZ

Waterproof Level

IP67

Cable

Standard: 1 meter length, wear resistance, oil proof, wide temperature, shielding cable 4*0.4mm2

Weight 

120g(No cable)

 

Electrical parameters of products

             Parameter

          Condition

  Minimum Value

  Typical Value

   Maximum Value

  Unit

         Supply Voltage

         Standard

          9

       1224

             36

    V


 Can be customized


           5


    V

         Working Current 

          no load


          40


  mA

    Operating Temperature 


         -40


            +85

   ℃

     Storage Temperature 


         -55


           +125

   ℃

 

Product mechanical parameters

• Connector: 1m straight leads (customizable)

• Protection class: IP68

• Material: aluminum alloy grinding sand oxidation

• Installation: four M6 screws

 


If interested, pls contact us info@ericcointernational.com                                                                 


ERICCO is expert in high quality borehole wireless mwd manufacturing and selling, who is one of the best manufacturers and suppliers of borehole wireless mwd with high precision. We have a professional team at your service.

Inquiry