ER-F-01 Features: Dynamic dip measurement Range + 1 to + 90 ° for optional Output way MODBUS
ER-F-01 Dynamic And Static Dual Mode Tilt Sensor
Introduction
ER-F-01 is the Dynamic And Static Dual Mode Tilt Sensor of MODBUS output, integrated dynamic and static dual-mode combination algorithm, launched by the RION company in the field of industrial field control. According to different working environment, the product is automatically switched to dynamic and static measurement mode. Ensure high accuracy measurement in various working environments. When the working environment is in static mode, static algorithm will be adopted in the dipmeter; when the working environment is in dynamic mode, dynamic algorithm will be adopted in the dipmeter, which can not only maintain the static high precision, but also ensure the dynamic high precision measurement of objects. RS485 hardware differential bus is used to transmit data. A high-precision 16bit A/D differential converter is built in, and the sensor output tilt and pitch Angle relative to the horizontal surface can be measured through the 5-order filtering algorithm. Due to the inbuilt ADI's high-precision digital temperature sensor, the temperature drift of the sensor can be corrected according to the change of the inbuilt temperature sensor to guarantee the high repeatability of the product in the low temperature and high temperature environment. The output response frequency standard can reach 18Hz. If higher response frequency is needed, our company can customize it according to users. The product is a real industrial grade product with reliable and stable performance and good expansibility. Suitable for all kinds of harsh industrial control environment.
Features
Dynamic dip measurement
Range + 1 to + 90 ° for optional
Output way MODBUS
DC 9~36V Wide voltage input
Wide working temperature-40~+8
resolution ratio 0.01°
IP67 Protection grade
High vibration resistance>2000g
Direct lead interface
Size:72.62×42×23.1mm(can be customized)
Application
Satellite dishes search the stars
Railway locomotive monitoring
All kinds of engineering machinery dip measurement
Petroleum drilling equipment
Radar vehicle platform detection
Attitude navigation of underground drill
Measurement of initial firing Angle of gun barrel
Directional measurement based on dip Angle
Satellite communications vehicle attitude detection
Measurement of navigation posture of ships
Shield pipe jacking application
Slope monitoring of geological equipment
Specifications
Parameter | Conditions | ER-F-01-10 | ER-F-01-30 | ER-F-01-60 | ER-F-01-90 | Unit |
Range of measurement | ±10 | ±30 | ±60 | ±90 | ° | |
Measurement axis | XY | XY | XY | XY | ||
Resolution ratio | 0.01 | 0.01 | 0.01 | 0.01 | ° | |
Static accuracy | @25℃ | 0.02 | 0.05 | 0.08 | 0.1 | ° |
Dynamic accuracy | @25℃ | 0.3 | 0.3 | 0.3 | 0.5 | ° |
Long-time stability | 0.05 | 0.05 | 0.05 | 0.05 | ||
Zero temperature coefficient | -40~85°C | ±0.006 | ±0.006 | ±0.006 | ±0.006 | °/℃ |
Temperature coefficient of flexibility | -40~85°C | ≤100 | ≤100 | ≤100 | ≤100 | ppm/℃ |
Poweron start time | 0.5 | 0.5 | 0.5 | 0.5 | S | |
Response time | 0.02 | 0.02 | 0.02 | 0.02 | s | |
Output rate | 10Hz、25Hz、50Hz Can be set up | |||||
Output signal | MODBUS | |||||
Electromagnetic compatibility | According toEN61000 andGBT17626 | |||||
MTBF | ≥50000 H/T | |||||
Insulation resistance | ≥100 M | |||||
Impact resistant | 100g@11ms、Three axis and with(A half sine wave) | |||||
Anti-Vibration | 10grms、10~1000Hz | |||||
Waterproof level | IP67 | |||||
Cable | Standard 1 m length, wear - resistant, oil - proof, wide temperature, shielded cable4*0.4mm2 | |||||
Weight | 120g(not include cable) |
Electrical parameters of products
Parameter | Conditions | Minimum | Typical values | Maximum | Unit |
The power supply voltage | Standard | 9 | 12、24 | 36 | V |
Options | 5 | V | |||
Working current | No load | 40 | mA | ||
Working temperature | -40 | +85 | ℃ | ||
Storage temperature | -55 | +125 | ℃ |
Product mechanical parameters
Connectors: 1m straight leads (customizable)
Protection class: IP67
Material: aluminum alloy grinding sand oxidation
Installation: three M4 screws
Operating principle
The core control unit imported from Europe is adopted. Using the principle of earth gravity, when the inclined Angle unit is tilted, the earth gravity will produce the component of gravity in the corresponding pendulum hammer, and the corresponding capacitance will change. Through amplification, filtering and transformation of the capacitance, the inclination can be obtained.
FAQ:
1. What is your quotation condition?
If you have DHL or Fedex account ,we can quote EXW price ,otherwise CIF or FOB price.
2.Do you have any discount when procurement?
We will quote sample price at first and we will quote volume price if you need more quantity.
3.How long is the delivery time?
For sensors,parts,modules : in stock-one week;no stock-2-4weeks; For systems,generally ,8-12 weeks.
4.How to deal with the quality problems?
If confirmation of product quality problem we can replace it freely for customer in the shortest period.
If interested in Dynamic And Static Dual Mode Tilt Sensor, pls contact us : info@ericcointernational.com