Dynamic and static dual mode tilt sensor

The main features:
●Dynamic biaxial dip measurement
●Range + 1 to + 90 ° for optional
●DC 9~36VWide voltage input
●Wide working temperature-40~+85℃
●Resolution ratio 0.01°
●IP67 Protection grad
●Direct lead interface
●Size:72.62×42×23.1mm
●Output way:CAN2.0B

Product Details

 

Product introduction

ER-F-04 is the latest dynamic and static dual-mode dip sensor developed .According to different working environment, the product is automatically switched to dynamic and static measurement mode. Ensure high accuracy measurement in various working environments. When the working environment is in a static mode, the static algorithm will be adopted in the dipmeter, and when the working environment is in a dynamic mode, the dynamic algorithm will be adopted in the dipmeter, which can not only maintain the static precision, but also ensure the dynamic high-precision measurement of objects. For industrial field control areas CAN2.0 B type output dual-axis tilt sensors, and the product CAN be used in fast moving car construction machinery, compared with the static dip switch CAN resist acceleration effect, CAN affect the vibration industry standard mold CAN transceiver, built-in high precision A/D difference converter, through 5 order filtering algorithm, which CAN measure sensor output relative to the horizontal plane tilt and pitch Angle.
Due to the inbuilt ADI's high-precision digital temperature sensor, the temperature drift of the sensor can be corrected according to the change of the inbuilt temperature sensor to guarantee the high repeatability of the product in the low temperature and high temperature environment. The output response frequency standard can reach 100Hz. If higher response frequency is needed, our company can customize it according to users. The product is a real industrial grade product with reliable and stable performance and good expansibility. Suitable for all kinds of harsh industrial control environment.

Tiltmeter

 Main features
●Dynamic biaxial dip measurement 
●Range + 1 to + 90 ° for optional 
●DC 9~36VWide voltage input
●Wide working temperature-40~+85℃ 

●Resolution ratio 0.01° 

●IP67 Protection grad
●Direct lead interface 
●Size:72.62×42×23.1mm 
●Output way:CAN2.0B


Product application
●Satellite dishes search the stars 
●Railway locomotive monitoring 
●All kinds of engineering machinery dip measurement
●Petroleum drilling equipment 
●Radar vehicle platform detection 
●Attitude navigation of underground drill
●Measurement of initial firing Angle of gun barrel 
●Directional measurement based on dip Angle 
●Satellite communication vehicle attitude detection
●Measurement of navigation posture of ships 
●Shield pipe jacking application 
●Slope monitoring of geological equipment


Product performance index

Parameter

Conditions

ER-F-04-10

ER-F-04-30

ER-F-04-60

ER-F-04-90

Unit

Range of measurement


±10

±30

±60

±90

°

Measurement axis


X  

X  

X Y 

X Y 


Resolution ratio


0.01

0.01

0.01

0.01

°

Static accuracy

@25℃

0.02

0.05

0.08

0.1

°

Dynamic accuracy

@25℃

0.1

0.2

0.3

0.5

°

Long-time stability


0.3

0.3

0.3

0.5


Zero temperature coefficient

-40~85°

±0.006

±0.006

±0.006

±0.006

°/

Temperature coefficient of flexibility

-40~85°

100

100

100

100

ppm/

Power on start time


0.5

0.5

0.5

0.5

S

response time


0.02

0.02

0.02

0.02

S

Output rate

5Hz15Hz35Hz50Hz100HZ Can be customized

Output signal

CAN2.0B bus

Electromagnetic compatibility

                     According to EN61000 and GBT17626

MTBF

≥50000 h/t

Insulation resistance

≥100 M

Impact resistant

100g@11ms、Three axis and with(A half sine wave)

Anti-Vibration

10grms101000Hz

Waterproof level

IP67

Cable

Standard 1 m length, wear - resistant, oil - proof, wide temperature, shielded cable 4*0.4mm2

Weight

                   80g(not include cable)

 

Electrical parameters of products

Parameter                                                          Conditions     Minimum    Typical    Maximum  Unit

Power supply voltage

    Standard

9

1224

36

V


    Can be       customized


         5


V

Working current

   No load


       40


mA

Working temperature


         -40


       +85

Storage temperature


         -55


      +125

 

Product mechanical parameters
Connectors: 1m straight leads (customizable)
Protection class: IP67
Material: aluminum alloy grinding sand oxidation
Installation: three M4 screws

Operating principle
The core control unit imported from Europe is adopted. Using the principle of earth gravity, when the inclined Angle unit is tilted, the earth gravity will produce the component of gravity in the corresponding pendulum hammer, and the corresponding capacitance will change. Through amplification, filtering and transformation of the capacitance, the inclination can be obtained.

 

If interested, pls contact us info@ericcointernational.com      

                                                                  

ERICCO is expert in high quality borehole wireless mwd manufacturing and selling, who is one of the best manufacturers and suppliers of borehole wireless mwd with high precision. We have a professional team at your service.

Inquiry