ER-E-02 Features: Single/two-axis dip measuremen Range plus or minus 10 ~ + 90 ° is optional Long term stability of 0.2 °
ER-E-02 Dual - Axis Digital Output Angle Veneer
Introduction
The ER-E-02 Dual - Axis Digital Output Angle Veneer a new generation of small digital MEMS tilting veneer. With the built-in accelerometer, it can be converted into the change of dip Angle by measuring the static gravity acceleration. The tilt and pitch Angle of the sensor output relative to the horizontal plane can be measured. Output mode RS232, RS485 or TTL level interface standard is optional. Due to the built-in MCU control system, the linearity of the sensor output is corrected twice, which makes up for the loss of accuracy caused by insufficient correction of the analog type.
This product adopts the non-contact method to measure the original quantity, which can output the current attitude inclination Angle in real time. It is an ideal choice for industrial automation control and platform measurement. It has strong ability to resist external electromagnetic interference and can adapt to long-term work in harsh industrial environment.
Features
Single/dual-axis dip measuremen
Range plus or minus 10 ~ + 90 ° is optional
Long term stability of 0.2°
DC + 5 v input
Output mode RS232, RS485, TTL
Wide working temperature - 40 ~ + 85 ℃
High vibration resistance >3500g
Resolution of 0.1
Small size 33 * 27 * 6 mm
Application
Electric blind chair leveling
Yuntai operation monitoring
Satellite positioning
Leveling of medical equipment
Chassis measurement
Four-wheel positioning system
Various engineering machinery Angle control
Specifications
Parameter | Conditions | Minimum | Typical | Maximum | Unit |
Thepower supply voltage | standard | 4.5 | 5 | 7 | V |
Working current | There is no load | 40 | mA | ||
Workingtemperature | -40 | +85 | ℃ | ||
Storage temperature | -55 | +100 | ℃ |
Product performance index
Parameter | Conditions | ER-E-02-10 | ER-E-02-30 | ER-E-02-60 | ER-E-02-90 | Unit |
Measuring range | ±10 | ±30 | ±60 | ±90 | ° | |
Measurement of shaft | X Y | X Y | X Y | X Y | ||
Resolution ratio | 0.1 | 0.1 | 0.1 | 0.1 | ° | |
Absolute precision | 0.1 | 0.2 | 0.3 | 0.4 | ° | |
Long-time stability | <0.5 | <0.5 | <0.5 | <0.5 | ||
Zero temperature coefficient | -40~85° | ±0.02 | ±0.02 | ±0.02 | ±0.02 | °/℃ |
Temperature coefficient of s ensitivity | -40~85° | ≤150 | ≤150 | ≤150 | ≤150 | ppm/℃ |
Power on start time | 0.5 | 0.5 | 0.5 | 0.5 | S | |
The response time | 0.02 | 0.02 | 0.02 | 0.02 | s | |
The output rate | 5Hz、15Hz、35Hz、50Hz、100HZ Can be set up | |||||
The output signal | RS232/RS485/RS422/TTL/PWM/CAN/MODBUSCan order | |||||
Electromagnetic compatibility | According to EN61000 and GBT17626 | |||||
Mean time to work without failure MTBF | ≥45000 h/t | |||||
Insulation resistance | ≥100 M | |||||
Impact resistant | 100g@11ms、Three axis and with(A half sine wave) | |||||
Anti-Vibration | 10grms、10~1000Hz | |||||
Waterproof level | IP67 | |||||
Cable | The standard 30CM line4*0.2mm2 | |||||
Weight | 10g(not include cabe) |
Product mechanical parameters
Connection: 25cm connector (with terminal)
Installation: four M2 screws
Copper column: optional
FAQ:
1. What is your quotation condition?
If you have DHL or Fedex account ,we can quote EXW price ,otherwise CIF or FOB price.
2.Do you have any discount when procurement?
We will quote sample price at first and we will quote volume price if you need more quantity.
3.How long is the delivery time?
For sensors,parts,modules : in stock-one week;no stock-2-4weeks; For systems,generally ,8-12 weeks.
4.How to deal with the quality problems?
If confirmation of product quality problem we can replace it freely for customer in the shortest period.
If interested in Dual - Axis Digital Output Angle Veneer, pls contact us : info@ericcointernational.com