Traditional users, such as geodesy and mapping applications, were among the earliest to adoptGNSS technology and have achieved great success by creating a wide variety of application models and data processing methods in use, still up to now A fairly large market segment. Measurement requirements are high precision, centimeter level positioning is already very mature, for manufacturers, power consumption and physical size requirements is the most important. And users of cartography applications demand more than just location, but also the course and other parameters of cameras or sensors that work with the receiver.
Once accuracy issues have eased, the issue of ubiquitous availability is clearly highlighted. Because GNSS devices do not always stay open and many applications require precise positioning under many challenging environmental conditions, GNSS is a backup swap technology with GNSS-like navigation technologies. These new users may be downtown, rural areas, mines, and may also be on the ground, in the air, location accuracy is only part of their needs. From this we can see that more needs, such as the integrity monitoring of real-time quality control and positioning solutions, become more and more important as the accuracy is met.
Potential high-precision GNSS users have many different application requirements compared to traditional high-precision users. The new user needs are not a single positioning, but rather the space-time dynamic environment experienced by the navigation application, often in an automatic or semi-automatic situation. The visible signals of all GNSS must be tracked, including the code (pseudoranges) generated by the tracking subsystem for each signal per satellite, carrier phase and Doppler measurements, multiple global systems and regional systems, and multiple frequency signals generated The amount of data is quite large, and these measurements eventually achieve positioning solutions, ranging from code positioning to real-time dynamics (RTK) up to Precise Point Positioning (PPP), which need to be implemented with different positioning algorithms. Tracking the results of all the signals and then exploiting the vast amount of input from the positioning engine impels the receiver's need for batch and storage capabilities that all result in a receiver's increased physical size, price, and power consumption that exactly matches the user's expectations The opposite. How to solve this contradiction, it is the receiver designers must seriously consider, must explore and evaluate new different applications and user needs, adopt the appropriate technology as a measure to deal with these challenges.