Home > Knowledge > Content

What do I need to pay attention to when using an inclinometer?

Mar 09, 2020

The main application of the inclinometer: the measurement of well deviation, magnetic azimuth, tool surface and other data at the bottom hole measurement point during drilling, and it can also be used to measure the well deviation and magnetic azimuth of a certain section of well track.

Applicable scope of inclinometer: measurement of borehole trajectory during drilling in petroleum, coal, water conservancy and other industries.

Note for inclinometer:

The probe tube is the core part of the instrument. Disassembly is not allowed. If disassembly, the measurement will be inaccurate or damaged.

The probe should be placed in a special instrument case.

Pay attention to protect the thread fastener from damage. After each removal, please apply thread oil and screw on the protective cap.

In use or storage, waterproof and moisture-proof.

For long-term storage of the probe tube, remove the battery canister and store it in a dry place.

Do not bump.

ER-MWD38S Measurement While Drilling (MWD)

If you want to get more details about inclinometer,pls visit https://www.ericcointernational.com/drilling-and-logging-system/