Features: 1.The basic support of satellite navigation signal simulation; 2.The basic support receiver antenna modeling,simulation vector rotation; 3.The basic simulation with the Beidou satellite navigation system,have an evaluation software;
ER-8000 Multi-system satellite navigation signal simulator can simulate BDS, GPS, GLONASS and Galileo global satellite positioning system (GPS) satellite navigation signals, can be used for many system compatible with the terminal equipment development, production, testing, testing and inspection.
l The basic support of satellite navigation signal simulation BDS, GPS, GLONASS and Galileo system at the same time;
l The basic support receiver antenna modeling;
l The basic simulation vector rotation;
l Inertial aided information output high dynamic scene receiver is required;
l The basic control software easy to use, flexible and powerful;
l Have an evaluation software to evaluate the performance of user machine;
l The basic simulation with the Beidou satellite navigation system (BDS) P code function.
l Support frequency points including the beidou satellite navigation system (BDS), B1, B2, B3, GPS L1 and L2 and L5, GLONASS L1, L2, and Galileo E1, E5a, E5b frequency points, choose 3 to 11 frequency points;
l Configuration data simulation software, can according to user requirements to configuration of simulation data, such as satellite orbit data, ionosphere, troposphere parameters, track users, etc.;
l Control software for satellite navigation signal simulator interruption of the output signal, signal restoration, switch every visible star signal, modulation mode selection and power control, etc.;
l Evaluation software, can test the receiver positioning for the first time, speed, sensitivity and positioning time and other indicators;
l Anomalies can emulate a satellite pseudorange, to test the receiver autonomous function;
l LCD display content: satellite number, channel number, the simulation time, doppler, pseudorange, satellite power, carrier information such as position and vehicle speed;
l Satellite navigation signals can be output through a cable or by an antenna.
(1) Real-time closed-loop
The real-time closed-loop function is added, the carrier motion trajectory is received in real time, and the satellite navigation data are generated in real time, so as to meet the closed loop simulation test requirements of real-time hardware in the loop simulation system under multi signal system.
(2) Inertial navigation AIDS
The auxiliary receiver can capture, track and locate in high dynamic, with the addition of inertial navigation aid, synchronous output of 3d position, 3d speed and 3d acceleration with satellite navigation signal.
(3) Multi-path signal
Each frequency point can increase the output of 12 multi-path signals and main path signals.
(4) Carrier rotation simulation
When the carrier rotates, the satellite navigation signal changes.In order to make the satellite navigation receiving equipment in ground test, fully simulate the real movement situation.
(5) Multiple antennas
Increasing the number of simulated antennas, the single simulator can support the simulation of four antennas.
l Satellite navigation terminal equipment research, development, testing;
l Hardware-in-the-loop simulation system real-time closed-loop test;
l Type anti-jamming satellite navigation receiver research, development, testing;
l Orientation, pose measurement equipment research, development, testing and simulation.
The output frequency
Signal generator unit
Number of generator channels：12 (per frequency point)
Multi-path signal number：12 (per frequency point)
Signal dynamic characteristic
Maximum acceleration rate：±3,000m/s3
Accuracy of the signal
Accuracy of pseudo distance phase control：better than 0.05m
Accuracy of pseudo distance change：better than 0.005m/s
Inter-channel consistency：<0.05m (code)
Initial coherence of carrier and pseudo-code：<1 degree
Hybrid power (Max)：-50dbc
Harmonic power (maximum)：-40dbc
Phase noise： -80dbc/Hz @100hz
Signal level control
Adjustment range： -110dbm ~ 150dBm
-30 dBm ~ 70dBm
Calibration accuracy: 0.5dB
Signal output mode
Cable directly or wirelessly
Rf output：N-type head
External clock input：BNC Female, 10MHz
Internal clock output：BNC Female, 10.23MHz
Second pulse output：BNC Female, 1PPS
Synchronous trigger input/output：BNC Female
External control port：Ethernet port
Power features：AC 220V, 50Hz
Dimensions (wide x height x depth)：445mm x 222mm x 611mm
Working humidity：75% or less (23 ℃)
Working temperature：0 ℃ to + 50 ℃
Storage temperature：- 30 ℃ ~ + 70 ℃
Vibration: ≤0.2g/100Hz (maximum)
Transportation requirements：meet the requirements of three levels of road transportation
Mean Time Between Failures(MTBF)：≥3000 hours
Mean time to repair (MTTR)：≤2 hours
A continuous working time：≥24 hours
Computer workstation recommendation configuration
Operating system：Windows XP/Windows 7 32bit
Processor：intel @2GHz or higher
External interface：RS232 and gigabit Ethernet ports
If interested,pls contact us firstname.lastname@example.org
ERICCO is expert in high quality borehole wireless mwd manufacturing and selling, who is one of the best manufacturers and suppliers of borehole wireless mwd with high precision. We have a professional team at your service.